STRUB Vulcogear Synt EP 220

Art.-No. 30577

Description
STRUB Vulcogear Synt EP are synthetic industrial gear oils based on polyalkylene glycols.

Application
For the lubrication of worm, spur, bevel and planetary gears exposed to high pressure and high temperature loads. Can be used in industrial plants, working machines and rail vehicles. For plain and roller bearings in hoists, calenders, rolling mills, paper machines, crushers, kneaders, conveyors,
etc.

• very favorable viscosity-temperature behavior (high viscosity index). Very good high and low
  temperature properties, continuous operating temperature up to 200°C, short term up to 250°C no significant coking or tendency to sludge and resinification
• High oxidation stability. High compressive strength and excellent protection against wear.
• lower coefficient of friction compared to mineral oil. This results in lower friction losses and lower energy consumption. In comparison with a mineral oil of the same viscosity, the operating temperature is lowered by 10 to 25°C.
• no tendency to foam formation, very good air release properties
• not miscible with mineral oil. Miscibility and compatibility with other synthetic gear oils must be clarified on a case-by-case basis.
• Seal materials such as A C M, Viton (F K M), PTFE and silicone rubber (M F Q) are resistant to STRUB Vulcogear Synt EP. Compatibility with other elastomers must be checked on a case-by-case basis
• STRUB Vulcogear Synt EP offer: Extended oil change intervals, more safety, fewer malfunctions during operation, energy savings 
  
  

Download PDS