STRUB Sharosol BIO 500

Description
STRUB Sharosol BIO 500 is particularly suitable for absorbent but also for non-absorbent formwork. Wood, steel as well as coated or plastic-coated formwork. Apply sparingly and evenly on dry and clean formwork. Unplaned (sawed sapwood) unused wooden formwork should be soaked in concrete release agent before first use. Non-absorbent formwork should be stripped briefly with rubber scraper after application with sprayer. Also excellent as a release and cleaning agent for blacktop work.

• biodegradable, VOC-free
• no stains or pores on concrete surfaces
• double separating effect, chemical and physical and therefore easy demoulding
• very good corrosion protection
• plaster layers, plates, wallpapers can be applied on the concrete after drying without problems
• concrete after drying
• low consumption: 1 liter for approx. 65 - 85 m² depending on formwork type
• suitable also for heated formwork > 80°C (ask our technical department, because the viscosity has to be adjusted resp. considered according to the temperature)
• biodegradable according to OECD 301 B guidelines: > 85 %

Download PDS