Art.-No. 32618
Description
High-performance cutting oil based on synthetic base oils and state-of-the-art active ingredients. Due to the high evaporation rate, the machined parts are (virtually) dry after the process when a spray application is used.
Application
Best suited for stamping, punching, light forming, turning, drilling, milling, sawing,
threading, bending and profiling of sheet metal. For steel, aluminum, Cr-Ni and copper alloys as well as galvanized sheets. Especially suitable and tested for use on Rapid Centers.
Features and advantages
STRUB Vulcan CF 2000 Series are free from chlorine, PCB, aromatics, heavy metals, amines and acids. Due to the composition, staining on aluminum and non-ferrous metals is not to be expected.
STRUB Vulcan CF 2000
Enables high dimensional stability, increases tool life and helps to achieve excellent surface finishes, as it contains additional EP additives.
STRUB Vulcan CF 2000 LR
Is higher additivated than CF 2000
STRUB Vulcan CF 2000 LRS
Highly additivated, contains AW, EP additives, 95 % residue-free evaporation.
STRUB Vulcan CF 2000 LRS-G
Highly additivated, contains AW, EP additives, less rapidly evaporating.
STRUB Vulcan CF 2000 PALM
Perforating, deforming galvanized rolled sheet, odorless, residue-free, light tinplate corrosion protection.
STRUB Vulcan CF 2000 I-FL
Stamping-drawing and forming oil for electrical sheet production. Meets IEC of low voltage switchgear, flash point > 100 °C.
STRUB Vulcan CF 2000/100
Cutting Fluid for cutting, punching, sawing, drilling, milling, bending and profiling, flash point >100°C.
STRUB Vulcan CF 2000/130
AlContains volatilizing lubrication improvers, evaporates almost residue-free. Especially for punching aluminum profiles. Flash point > 100 °C
STRUB Vulcan CF 2000 GT
Low-viscosity punching oil, evaporates without leaving residues.