- Help Centre
- Industry
- Spindle fluids
-
Automotive
-
Spray & Cleaner
-
Construction & Forestry
-
Industry
- Gear oils industry
- Slideway oils
- Hydraulic oils
- Vacuum pump oils
- Compressor oils
- Various oils industry
- Turbine oils
- Cylinder oils
- Heat transfer oils SYNT
- Spindle fluids
- Greases
- Pastes
- Special greases
- Silicone greases
- Actuating agents Cooling lubricants
- Cooling lubricants
- Defoamer Cooling lubricants
- Cutting oils
- Thread Cutting Oils & Pastes
- Punching oils
- Fast evaporating punching oils
- Hardening oils
- Minimum Quantity Lubrication Off
- Drawing and forming oils
- Grinding oils
- Lapping and honing oils
- Erosion oils
- Silicone oils
- Forming pastes
- Die lubricant
- Special products
- Mould release agent
-
H1 FOOD
-
VIRO-PROTECT
-
Devices + Accessories
STRUB Spindle fluid XLI
Art.-No. 30719
Description
STRUB Spindle Fluid XLI is a non-toxic, environmentally friendly, glycol-free inhibitor concentrate.
Application
The patented acid technology enables long-term corrosion protection in aqueous solutions on all metals including aluminum-iron-copper-zinc and solder alloys. Mixing ratio: 7 % by volume in tap water. STRUB Spindle Fluid XLI can be used as a live time coolant. However, the concentration should be checked periodically by refractometer (% Brix).
Refractometer reading: 2.6 = ~ 8 vol.%
3.3 = ~ 10 vol.%
In case of an unforeseen change, our STRUB System Cleaner should be mixed into the system approx. 2 % 24 hours beforehand.
Features and advantages
- Prevents electrochemical corrosion
- Among other things, protects against the leaching of copper
- (complex formation) in the spindle cooling system
- excellent cavitation protection
- increases the thermal conductivity
- environmentally friendly