- Help Centre
- Industry
- Spindle fluids
-
Automotive
-
Spray & Cleaner
-
Construction & Forestry
-
Industry
- Gear oils industry
- Slideway oils
- Hydraulic oils
- Vacuum pump oils
- Compressor oils
- Various oils industry
- Turbine oils
- Cylinder oils
- Heat transfer oils SYNT
- Spindle fluids
- Greases
- Pastes
- Special greases
- Silicone greases
- Actuating agents Cooling lubricants
- Cooling lubricants
- Defoamer Cooling lubricants
- Cutting oils
- Thread Cutting Oils & Pastes
- Punching oils
- Fast evaporating punching oils
- Hardening oils
- Minimum Quantity Lubrication Off
- Drawing and forming oils
- Grinding oils
- Lapping and honing oils
- Erosion oils
- Silicone oils
- Forming pastes
- Die lubricant
- Special products
- Mould release agent
-
H1 FOOD
-
VIRO-PROTECT
-
Devices + Accessories
STRUB Spindelfluid XLI++ Concentrate
Art.-No. 32029
Description
STRUB Spindle Fluid XLI ++ Concentrate is a corrosion protection concentrate for spindle and cooling systems. The passivators contained in the product provide long-term protection against corrosion for a wide range of materials. In particular, electrochemical reactions are prevented and materials such as aluminum, cast iron, nonferrous and ferrous metals are protected. Not suitable for galvanized, zinc-plated surfaces. In high-speed, highperformance motor spindles, the drive shafts can be cooled trouble-free with STRUB Spindle Fluid XLI ++ Concentrate. The spindle fluid can also be used in all other, less stressed systems.
Advantages
- suppresses electrochemical corrosion
- excellent cavitation protection
- low maintenance, long-term protection
- very good heat dissipation
- compatible with common sealing materials and plastics
- special metal and corrosion protection inhibitors
Specifications and performance profile
Various approvals including STEP-TEC AG
Application
For the preparation of STRUB Spindle Fluid XLI++ Concentrate only tap/drinking water may be used which does not exceed the following limits.
Water hardness: 20°dH, chloride 100 ppm, sulfate 100 ppm.
If the listed water values are exceeded, STRUB Spindle Fluid XLI ++ Ready must be used. STRUB Spindle Fluid XLI ++ Concentrate is mixed as follows; 55 parts water and 45 parts STRUB Spindle Fluid XLI ++ Concentrate. Optimal conditions of use are temperature-stabilized cooling units to extend the service life of the coolant.