- Help Centre
- Construction & Forestry
- Formwork oils
-
Automotive
-
Spray & Cleaner
-
Construction & Forestry
-
Industry
- Gear oils industry
- Slideway oils
- Hydraulic oils
- Vacuum pump oils
- Compressor oils
- Various oils industry
- Turbine oils
- Cylinder oils
- Heat transfer oils SYNT
- Spindle fluids
- Greases
- Pastes
- Special greases
- Silicone greases
- Actuating agents Cooling lubricants
- Cooling lubricants
- Defoamer Cooling lubricants
- Cutting oils
- Thread Cutting Oils & Pastes
- Punching oils
- Fast evaporating punching oils
- Hardening oils
- Minimum Quantity Lubrication Off
- Drawing and forming oils
- Grinding oils
- Lapping and honing oils
- Erosion oils
- Silicone oils
- Forming pastes
- Die lubricant
- Special products
- Mould release agent
-
H1 FOOD
-
VIRO-PROTECT
-
Devices + Accessories
STRUB Sharosol BIO 500
Art.-No. 30001
Description
STRUB Sharosol BIO 500 is particularly suitable for absorbent but also for non-absorbent formwork. Wood, steel as well as coated or plastic-coated formwork. Apply sparingly and evenly on dry and clean formwork. Unplaned (sawed sapwood) unused wooden formwork should be soaked in concrete release agent before first use. Non-absorbent formwork should be stripped briefly with rubber scraper after application with sprayer. Also excellent as a release and cleaning agent for blacktop work.
Features and advantages
- biodegradable, VOC-free
- no stains or pores on concrete surfaces
- double separating effect, chemical and physical and therefore easy demoulding
- very good corrosion protection
- plaster layers, plates, wallpapers can be applied on the concrete after drying without problems
- concrete after drying
- low consumption: 1 liter for approx. 65 - 85 m² depending on formwork type
- suitable also for heated formwork > 80°C (ask our technical department, because the viscosity has to be adjusted resp. considered according to the temperature)
- biodegradable according to OECD 301 B guidelines: > 85 %