STRUB Sharosol BIO 500 B

Art.-No. 31719

Description
For absorbent and non-absorbent formwork. Wood, steel and coated or plastic-coated formwork. Apply sparingly and evenly undiluted to dry and as clean as possible formwork. Unplaned (sawed sapwood) unused wooden formwork should be soaked in concrete release agent before first use. Non-absorbent formwork should be stripped briefly with a rubber scraper after application with spray equipment.

• biodegradable, VOC-free
• no stains or pores on concrete surfaces
• double separating effect, chemical and physical and therefore easy stripping of formwork
• very good corrosion protection
• plaster layers, plates, wallpapers can be applied on the concrete without problems after drying out
• low consumption: 1 liter for approx. 65 - 85 m2 depending on the formwork type
• suitable also for heated formwork > 80°C (ask our technical department, because the viscosity has to be adjusted case by case resp. has to be considered according to the temperature)
• biodegradable according to OECD 301B guidelines: >80 %.

Download PDS