- Help Centre
- Construction & Forestry
- Formwork oils
-
Automotive
-
Spray & Cleaner
-
Construction & Forestry
-
Industry
- Gear oils industry
- Slideway oils
- Hydraulic oils
- Vacuum pump oils
- Compressor oils
- Various oils industry
- Turbine oils
- Cylinder oils
- Heat transfer oils SYNT
- Spindle fluids
- Greases
- Pastes
- Special greases
- Silicone greases
- Actuating agents Cooling lubricants
- Cooling lubricants
- Defoamer Cooling lubricants
- Cutting oils
- Thread Cutting Oils & Pastes
- Punching oils
- Fast evaporating punching oils
- Hardening oils
- Minimum Quantity Lubrication Off
- Drawing and forming oils
- Grinding oils
- Lapping and honing oils
- Erosion oils
- Silicone oils
- Forming pastes
- Die lubricant
- Special products
- Mould release agent
-
H1 FOOD
-
VIRO-PROTECT
-
Devices + Accessories
STRUB Sharosol 556
Art.-No. 33372
Description
STRUB Sharosol 556 is a ready-to-use, water-based concrete release emulsion for low-porosity surfaces based on renewable raw materials. For steel, aluminum or plastic-modified formwork. The release agent emulsion is recommended for absorbent and non-absorbent formwork types, especially for vertical and horizontal applications. Preliminary tests must be carried out for rubber formwork.
Application
After stripping, the formwork must be cleaned clean of cement and release agent residues. Immediately afterwards, spray STRUB Sharosol 556 sparingly onto the dry surface (atomizer with nozzle, >6bar) and allow to dry sufficiently. Complete drying is essential to achieve a beautiful visible surface without large air inclusions.
Features and advantages
- biodegradable and environmentally friendly
- less stains and air voids on concrete surfaces
- no grease stains
- no sanding of the surface
- excellent corrosion protection
- gentle to formwork material
- plaster layers, boards, wallpapers can be applied on the concrete after drying without any problems
- 15- 30 g/m